|
10" Object Movie Turntable
|
|
10" Object Turntable COVERS
|
|
Retail Price: $19.95
|
|
|
|
Retail Price: $9.95
|
|
|
|
|
This is a disk of 10" diameter to be mounted on Rotator D8/16.
Designed to mount onto our advanced rotators RD8, RD12 and/or RD16.
Includes mounting kit.
Also available (sold separately) are a set of 4 covers - click here
|
A complete set of 4 velvet covers for the 10" turntable - RED, WHITE, BLUE & BLACK
These covers stretch fit over the 10" plate of the Object Movie Turntable
|
|
|
|
T-adapter (2nd generation) with 30mm offset
|
|
Camera Mounting Plate CP-2
|
|
Retail Price: $15.00
|
|
|
Retail Price: $20.00
Sale Price: $10.00
You save $10.00!
|
|
|
|
|
|
click product image above
New T-30-II (2nd generation) T-adapter. This newer T-adapter has a 30mm offset designed primarily for point and shoot cameras where the tripod mount is offset from the center barrel of the lens.
Features include adjustbale rail guides to prevent camera from twisting and scale stop to remember offset position. Hex key included to set initial mount and extra screws and guides also included.
Note: video shows first generation T-30
|
This is out new Camera Mounting Plate (CP-2). The CP-2 replaces the older CP-1.
CP-2 consists of 2 parts - plate and base. The base mounts allows mounting to the Nodal Ninja the plate allows for anti-twist mounting to camera. We also include an extra plate with different mounting surface to allow user to select best plate for their camera.
Please see our Quick Reference Guide for this new Camera Plate
http://www.nodalninja.com/images/CP2_qrg.pdf
|
|
|
|
Quick Release System
|
|
Quick Release Clamp
|
|
Retail Price: $39.95
|
|
|
|
Retail Price: $24.95
|
|
|
|
|
Fanotec's low profile Quick Release System allows your camera to be taken on and off quickly while maintaining a reproducible position on Nodal Ninja 5 and NN180 (not suggested for us with NN3 due to possible adjustment limitations). Includes clamp item# QRC2 and plate item# QRP2. There is a 15mm slot on the plate. So you can compensate for off-set of 15mm on either side. There are 3 pair of sockets on the clamp, to which a thin rail plate is attached. These pairs are 10mm apart. The rail plate is attached to the center pair by default. By attaching the plate to the other 2 pairs, an off-set of additional 10mm is obtained. So a total of 25mm offset can be easily compensated by the QR2. However, the QR2 is 60mm in width, you can slide the plate out by another 15mm (also supported by the position stop on the clamp) without compromising stability. So there is a total of 40mm. Only a few point and shoot cameras will need this amount of off-set compensation.
For QRS-2 tutorial see: http://www.nodalninja.com/support/QRS2.html
QRC2 Clamp:
The clamp includes an integrated rail plate to allow mounting directly to the Nodal Ninja rail system.
note: the clamp will work with many Manfrotto plates and Gitzo/Giottos plates - does not fit the Gitzo G2285M).
QRP2 Plate:
The plate mounts to the base of your camera. Incorporated into the plate is a 15mm offset for battery grips (as with some Canon Grips) where the tripod mount is not centered with the barrel of the lens.
note: the plate will not fit Manfrotto or Gitzo clamps.
|
When used with Fanotec's dedicated plate (QRP2), this low profile Quick Release Clamp allows your camera to be taken on and off quickly while maintaining a reproducible position on Nodal Ninja's. The clamp includes an integrated rail plate to allow mounting directly to the Nodal Ninja rail system.
note: this clamp will work with many Manfrotto plates and Gitzo/Giottos plates.
|
|
|
|
Rail Plate 1/4 inch
|
|
Quick Release Plate
|
|
Retail Price: $15.00
|
|
|
|
Retail Price: $14.95
|
|
|
|
|
Thinner alternative to standard camera mounting plate for adapting QR systems on upper and lower rail of Nodal Ninjas. This QR rail plate is thin - only 7mm when compared to the standard camera mounting plate.
This rail plate comes with a camera mounting mounting knob with slightly shorter threads.
Note that the QR rail plate is ONLY recommended for QR systems with lever lock. It is NOT compatible with our Arca Style QR Clamp with screw knob.
|
When used with Fanotec's dedicated Quick Release Clamp (QRC2), this low profile
Quick Release Plate allows your camera to be taken on and off quickly
while maintaining a reproducible position on Nodal Ninja's. The plate mounts to the base of your camera. Incorporated into the plate is a 15mm offset for battery grips (as with some Canon Grips) where the tripod mount is not centered with the barrel of the lens.
note: This plate will not fit Manfrotto or Gitzo clamps.
|
|
|
|
Arca Style Quick Release Clamp
|
|
Rail Plate 3/8 inch
|
Retail Price: $49.95
Sale Price: $44.95
You save $5.00!
|
|
|
|
Retail Price: $15.00
|
|
|
|
|
The new low profile Arca Style Clamp is compatible with the Acra style systems.
Can also be used with Fanotec's Arca Style Plate (#ASQRP-1).
Not recommended for DSLR uses with NN3's.
Images not yet available
|
Thinner alternative to standard camera mounting plate for adapting QR
systems on upper and lower rail of Nodal Ninjas. This QR rail plate is
thin - only 7mm when compared to the standard camera mounting plate and is designed to be used with 3/8 inch quick release systems with 3/8 socket such as RRS and Manfrotto as shown in images displayed.
Note that the QR rail plate is ONLY recommended for QR systems with
lever lock. It is NOT compatible with our Arca Style QR Clamp with
screw knob.
|
|
|
|
Arca Style Quick Release Plate ARCRP-1
|
|
Nodal Ninja 3/MKII Case
|
|
Retail Price: $24.95
|
|
|
|
Retail Price: $14.95
|
|
|
|
|
The new low profile Arca Style Plate by Fanotec mounts to the base of your camer.
This plate can used with Fanotec's Arca Style Clamp (ASQRC-2) and/or most Arca Style Clamps for mounting in a reproducible manner."
Incorporated into the plate is a 10mm offset for battery grips (as with some Canon Grips) where the tripod mount is not centered with the barrel of the lens.
Not recommended for use with NN3 if used with Camera Plate and Arca Style Clamp
|
NN3/MKII Hard Shelled Case
These cases are dual zippered and foam lined.
These case have cutouts designed to fit NN3 MKII only.
|
|
|
|
Nodal Ninja Case for NN3 with R-D8/R-D16
|
|
NN5/5L Hard Case
|
Retail Price: $19.95
Sale Price: $14.95
You save $5.00!
|
|
|
|
Retail Price: $19.95
|
|
|
|
|
These cases are dual zippered and foam lined.with a Velcro adjustable divider.
Designed for use with NN3's with advanced rotators R-D8 / R-D16.
|
For NN5/L - This is a quality case and highly recommended to protect your precision equipment.
Foam lined with dual zippers.
These case have cutouts designed to fit NN5 and NN5L only.
|
|
|
|
Nodal Ninja Case for NN180 and NN5's with RD8/RD16
|
|
Rotator Knob Set for R-D4
|
Retail Price: $19.95
Sale Price: $14.95
You save $5.00!
|
|
|
|
Retail Price: $25.00
|
|
|
|
|
|
These cases are dual zippered and foam lined.with a Velcro adjustable divider.
Designed for use with NN180 and NN5's with advanced rotators (RD8, RD12, RD16)
|
Rotator Knob Set for R-D4
Consists of 1 larger rotator pan lock knob and 1 smaller detent plunger knob attached with retaining wire.
|
|
|
|
Rotator Knob Set for R-D8
|
|
Rotator Knob Set for R-D16
|
|
Retail Price: $25.00
|
|
|
|
Retail Price: $35.00
|
|
|
|
|
Rotator Knob Set for R-D8
Consists of 1 larger rotator pan lock knob and 1 smaller detent plunger knob attached with retaining wire.
|
Rotator Knob Set for R-D16
Consists of 1 larger rotator pan lock knob and 2 smaller detent plunger knob attached with retaining wire.
|
|
|
|
Advanced Rotator Colored Detent Plunger Knob - Purple
|
|
Advanced Rotator Colored Detent Plunger Knob - Brass
|
|
Retail Price: $15.00
|
|
|
|
Retail Price: $15.00
|
|
|
|
|
Advanced Rotator Colored Detent Plunger Knob - Purple
Customers have been asking for different colored knobs for the advanced rotator so Nick Fan (Manufacturer) answered the demand by offering 7 alternate anodized colors.
See: http://nodalninja.com/forum/index.php/topic,657
|
Advanced Rotator Colored Detent Plunger Knob - Brass
Customers have been asking for different colored knobs for the advanced rotator so Nick Fan (Manufacturer) answered the demand by offering 7 alternate anodized colors.
See: http://nodalninja.com/forum/index.php/topic,657
|
|
|
|
Advanced Rotator Colored Detent Plunger Knob - Magenta
|
|
Advanced Rotator Colored Detent Plunger Knob - Grey
|
|
Retail Price: $15.00
|
|
|
|
Retail Price: $15.00
|
|
|
|
|
Advanced Rotator Colored Detent Plunger Knob - Magenta
Customers have been asking for different colored knobs for the advanced rotator so Nick Fan (Manufacturer) answered the demand by offering 7 alternate anodized colors.
See: http://nodalninja.com/forum/index.php/topic,657
|
Advanced Rotator Colored Detent Plunger Knob - Grey
Customers have been asking for different colored knobs for the advanced rotator so Nick Fan (Manufacturer) answered the demand by offering 7 alternate anodized colors.
See: http://nodalninja.com/forum/index.php/topic,657
|
|
|
|
Advanced Rotator Colored Detent Plunger Knob - Dark Blue
|
|
Advanced Rotator Colored Detent Plunger Knob - Green
|
|
Retail Price: $15.00
|
|
|
|
Retail Price: $15.00
|
|
|
|
|
Advanced Rotator Colored Detent Plunger Knob - Dark Blue
Customers have been asking for different colored knobs for the advanced rotator so Nick Fan (Manufacturer) answered the demand by offering 7 alternate anodized colors.
See: http://nodalninja.com/forum/index.php/topic,657
|
Advanced Rotator Colored Detent Plunger Knob - Green
Customers have been asking for different colored knobs for the advanced rotator so Nick Fan (Manufacturer) answered the demand by offering 7 alternate anodized colors.
See: http://nodalninja.com/forum/index.php/topic,657
|
|
|
|
Advanced Rotator Colored Detent Plunger Knob - Light Blue
|
|
Advanced Rotator Colored Detent Plunger Knob - 7 Colors
|
|
Retail Price: $15.00
|
|
|
Retail Price: $105.00
Sale Price: $75.00
You save $30.00!
|
|
|
|
|
Advanced Rotator Colored Detent Plunger Knob - Light Blue
Customers have been asking for different colored knobs for the advanced rotator so Nick Fan (Manufacturer) answered the demand by offering 7 alternate anodized colors.
See: http://nodalninja.com/forum/index.php/topic,657
|
Advanced Rotator Colored Detent Plunger Knob - 7 Colors
Customers have been asking for different colored knobs for the advanced rotator so Nick Fan (Manufacturer) answered the demand by offering 7 alternate anodized colors.
Colors included in this set:
Purple
Brass
Magenta
Grey
Dark Blue
Green
Light Blue
See: http://nodalninja.com/forum/index.php/topic,657
|
|
|
|
Rotator Handle
|
|
R1 R10 External Level
|
Retail Price: $15.00
Sale Price: $10.00
You save $5.00!
|
|
|
Retail Price: $15.00
Sale Price: $10.00
You save $5.00!
|
|
|
|
|
Rotator HandleIn order to reduce stress on the lens and camera body during rotation,
we are making a handle for the advanced rotators. Although it is
designed for R1/10 with Rotator D4, it will work for Rotator D4/8/12/16. This handle screws directly into one of the unused holes in the advanced rotators.
|
R1 R10 LevelOptional spirit level allows for convenient view position. Primarily designed for the R10 (without level) it will also work with R1 for easier viewing when leveling.The level is clamped to Rotator D4. It extends out of the R1/10 and can
be placed to any easy to view position.
|
|
|
|
Advanced Rotator D-8/D16 to R1 R10 Adapter Kit
|
|
M6 female to 3/8" male thread adapter for advanced rotators.
|
|
Retail Price: $20.00
|
|
|
|
Retail Price: $6.00
|
|
|
|
|
Advanced Rotator D-8/D16 to R1 R10 Adapter KitThis adapter kits allow for mounting the R1 or R10 onto either our D8 or D16 advanced rotators.
Includes all mounting hardware needed for a quick and easy install.
|
"click image for more"
M6 female to 3/8" male thread adapter for advanced rotators.
Converts M6 female to 3/8" male thread.
Includes screw adapter, hex and spring washer.
note: Install the spring washer with the concave side facing the rotator.
|
|
|
|
3/8 to 1/4 screw adapter
|
|
NN3/MKII Camera Mounting Knob
|
|
Retail Price: $5.00
|
|
|
|
Retail Price: $10.00
|
|
|
|
|
3/8 to 1/4 screw adapter
this item is already included with NN3 MKII and NN5L.
|
NN3/MKII Camera Mounting Knob included with each NN3 MKII.
This knob screws into either the camera mount plate, if attached to camera base, or directly to the camera base using the square rubber washer (with some NN3's).
Click image for exploded parts view
|
|
|
|
NN5/L Rail Stops - 1pair
|
|
NN3/MKII Camera Mounting Knob w/ Square Washer
|
|
Retail Price: $10.00
|
|
|
|
Retail Price: $20.00
|
|
|
|
|
Rail Stops - Locks your camera into the same position each time.
NOTE: screw types may vary from those in picture
|
NN3/MKII Camera Mounting Knob with Square Rubber Washer
included with each NN3 sold
|
|
|
|
Nodal Ninja 3/MKII Rail Stops
|
|
NN3 Upper Rotator Tightening Knob
|
|
Retail Price: $5.00
|
|
|
|
Retail Price: $10.00
|
|
|
|
|
These plastic rail stops locks your camera into the same position each time.
NOTE: screw types may vary from those in picture.
For more information click here
|
NN3 Upper Rotator Tightening Knob
included with each NN3 sold.
This knob is used to tighten the tension of the upper rotator.
Click image for exploded parts view.
NOT FOR USE WITH NN3 MKII
|
|
|
|
NN3/MKII Vertical Rail Knob
|
|
NN3 Small Vertical Rail Mounting Knob
|
|
Retail Price: $10.00
|
|
|
|
Retail Price: $10.00
|
|
|
|
|
NN3/MKII Vertical Rail Knob included with each NN3 sold.BR>
The knob secures the upper assembly to the lower assembly by mounting the vertical rail onto the lower rail.
Click image for exploded parts view.
|
Smaller diameter Vertical Rail Knob for lower rail on all NN3 series pano heads.
The smaller knob design allows greater inward adjustment needed with many point and shoot cameras and also some pano heads using the RD3L rotator. Good for NPP from 28-40mm from upper rotator center.
No charge for swapping the standard vertical rail mounting knob with these smaller diameter knobs during purchase of NN (mention in notes section during checkout).
|
|
|
|
NN5 Small Camera Mounting Knob
|
|
NN5 Camera Mounting Knob
|
|
Retail Price: $10.00
|
|
|
|
Retail Price: $10.00
|
|
|
|
|
Smaller diameter Camera Mounting Knob for upper rail on all NN5 series pano heads.
The smaller knob design allows for
greater inward adjustment needed with many point and shoot cameras. Good
for NPP from 28-42.5mm from upper rotator center.
No charge for swapping the standard vertical rail mounting knob with these smaller diameter knobs during purchase of Nodal Ninja- (mention in notes section during checkout).
|
NN5 series Camera Mounting Knob (included with each NN5).
Click image for exploded parts view
|
|
|
|
Nodal Ninja 5 Lower Rotator Detent Plunger Knob
|
|
Nodal Ninja 5 3 knob set
|
|
Retail Price: $14.95
|
|
|
Retail Price: $30.00
Sale Price: $20.00
You save $10.00!
|
|
|
|
|
For use with NN5 and NN5L lower rotators that use the interchangeable detent rings. This knob allows the user to engage the detents. The unit has an integrated spring loaded ball bearing detent plunger (tension set at the factory )and rubber edged aluminum knurled knob. Includes rubber O ring.
Note: old part number #14 - N5LRRK
|
Includes all 3 knobs for NN5 and/or NN5L with or without the rotators.
Camera Mounting Knob
Vertical Rail Mounting Knob
Upper Rotator Tension Knob
|
|
|
|
Nodal Ninja 5 Lower Rotator Hex Screws
|
|
Nodal Ninja 5 Lower Rotator Lock Knob
|
|
Retail Price: $0.50
|
|
|
|
Retail Price: $19.95
|
|
|
|
|
|
For use with NN5 and NN5L lower rotators that use the interchangeable detent rings. These 2 screws mount the lower rotator to the lower rail of the NN5/L - includes hex key.
|
For use with NN5 and NN5L lower rotators only. This knob allows the user to lock the rotator preventing it from rotating. This item is included with each NN5 and NN5L sold.
|
|
|
|
NEW IPIX Converter Lens
|
|
EZ-Leveler Case Only
|
|
Retail Price: $99.95
|
|
|
|
Retail Price: $9.95
|
|
|
|
|
This lens is was developed for the IPIX Corp. and used in the making of Real Estate Virtual Tours. Only 2 or 3 shots around for a full 360 x 180 degree interactive QTVR panorama. Can be used on a Nikon P5100 using the Nikon UR-E20 adapter and a 28-37 step ring, or the Nikon P6000 with the UR-E21 adapter and a 43-37 step ring. While these lens converters have never been used each has a bar code sticker placed on them from IPIX.
Features: Focal length equivalent is 4.88mm.
Lens mounting thread is 37mm.
Fixed Aperture of f 5.2 gives exceptional depth of field. 14.9mm image circle diameter.
185 degree circular field of view.
Includes: IPIX lens, front and rear lens cap, draw string case.
Suggested stand alone resale price = $99.95
Note: Also not recommended if needing to produce full screen panoramas. The end panos are suitable for smaller windowed panoramas.
Here are some sample panoramas (in flash) taken using the IPIX lens converter.
http://nodalninja.com/media/ipix_kw1.html
http://nodalninja.com/media/ipix_kw2.html
Images courtesy of Ken Warner
|
Attractive hard shelled foam lined zippered case.
Fits the EZ-Leveler-I & II and R-D3L
|
|
|
|
PLASTIC RETAINER WASHERS - 10ea
|
|
Lens Clamp Pouch
|
|
Retail Price: $5.00
|
|
|
|
Retail Price: $10.00
|
|
|
|
|
These are the little plastic retainer washers that help to hold the camera mounting knob (CMK) and vertical rail mounting knob (VRMK) in place for both NN3 and NN5 series pano heads.
Price includes little baggy of 10 ea.
note: "unscrew" knob from retaining washer when removing or you will strip it.
|
Neoprene lens pouch with draw string for storing lens with R1/R10 ring clamp mounted.
Larger pouch ideal for Sigma, Olympus, and Tokina lenses
Small pouch ideal for Nikon, Sunex, and Pentax lenses.
|
|
|
|
Advanced Rotator Silicone Plugs
|
|
Install Kit for Advanced Rotators on NN3
|
|
Retail Price: $2.50
|
|
|
|
Retail Price: $5.00
|
|
|
|
|
Silicone plugs to act as dust protectors for all advanced rotators (RD4/RD8/RD12/RD16).
Includes 5 pair (10ea plugs) per package.
RD4/8 only needs 1 package
RD12/16 needs 2 packages.
|
Install Kit for RD8 and RD16 Advanced Rotators on NN3
Includes washer, hex screw, hex key, cover knob
photos to follow
|
|
|
|
Install Kit for Advanced Rotators on NN5/5L
|
|
|
|
Retail Price: $5.00
|
|
|
|
|
Install Kit for RD8 and RD16 Advanced Rotators on NN5/5L
Includes washer, hex screw, hex key, cover knob
photos to follow
|
|
|
